Primary Current Test Systems
Available on order
INGVAR Primary Current Testing System
Megger
Primary Current Test Systems
EGIL Automatic Circuit Breaker Tester
Brand:
Megger
Available on order
The EGIL Automatic Circuit Breaker Tester is suitable for testing the timing and travel of all circuit breakers with one switch per phase.
Extremely simple to use and reliable.
Two separate synchronization channels for auxiliary contact measurement.
Analog measurement channels for motion transducers or general voltage/current measurements.
Static and dynamic stability testing with the SDRM201 accessory.
The EGIL circuit breaker tester is designed for automatic circuit breakers with one contact per phase. It features functions typically found in more complex testing systems but is designed to be smaller, easier to use, and less expensive than other similar kits.
EGIL has three channels connected together on one side and two separate timing channels for auxiliary contact measurement. Events on parallel contacts are recorded and displayed simultaneously using pre-inserted resistors.
To simplify on-site connections, EGIL is supplied with ready-made multi-cable sets for both main and auxiliary contacts. Coil currents are measured automatically and displayed along with other parameters immediately after testing on the display or via the built-in printer. Additionally, EGIL has an integrated automatic circuit breaker control unit that automatically sets the device for the next sequential operation, making it easy and intuitive to use.
Extremely simple to use and reliable.
Two separate synchronization channels for auxiliary contact measurement.
Analog measurement channels for motion transducers or general voltage/current measurements.
Static and dynamic stability testing with the SDRM201 accessory.
The EGIL circuit breaker tester is designed for automatic circuit breakers with one contact per phase. It features functions typically found in more complex testing systems but is designed to be smaller, easier to use, and less expensive than other similar kits.
EGIL has three channels connected together on one side and two separate timing channels for auxiliary contact measurement. Events on parallel contacts are recorded and displayed simultaneously using pre-inserted resistors.
To simplify on-site connections, EGIL is supplied with ready-made multi-cable sets for both main and auxiliary contacts. Coil currents are measured automatically and displayed along with other parameters immediately after testing on the display or via the built-in printer. Additionally, EGIL has an integrated automatic circuit breaker control unit that automatically sets the device for the next sequential operation, making it easy and intuitive to use.
