HVP-40 (40KV DC, 1000MΩ)

Maximum Voltage: DC: 40KV, AC: 28KV (50/60Hz only).
Input Impedance: 1000MΩ.
Accuracy:
DC: ± 1% up to 20KV. ± 2% up to 40KV.
AC: -5% to -10% (50/60Hz).
Division Ratio: 1000:1.
Standards: CE, TUV GS, UL, CUL, IEC1010.
Specifications (20 ± 5℃, RH < 80%).
WARNING!
Before taking measurements, connect the alligator clip of this probe to earth ground and ensure a good electrical connection.
Input impedance: 1000MΩ.
Maximum Test Voltage: DC: 0-40KV.
AC: 1-28KV (50/60Hz).
Safety: EN61010 UL3111-1 TUV / GS.
IEC 1010 CAT II, Pollution level 2.
Polarity: Positive / Negative.
Accuracy:
DC: ± 1% to 20KV.
± 2% to 40KV.
AC: -5% to -10% (1-28KV; 50/60Hz).
Temperature Coefficient: ≦ 200ppm/℃.
Maximum Load Current: ≦ 40μA (at 40KV DC).
Maximum Load Power: ≦ 1.6W.
Operating Temperature: 0℃ to +50℃.
Storage Temperature: -20℃ to +70℃.
Ground Lead Length: 90cm.
Output Cable Length: 100cm.
For: DMM.
Output Division: 1V / 1KV.
Dimensions: 340mm x 80mm.
Weight: about 300g.
Note: For 10MΩ input impedance.
Only for DMMs with accuracy < 0.5%.